Hannah Grenz
- Total activity 65
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 31
Articles
Recent activity by Hannah Grenz-
Step 3.5: Settings > Scheduling (BETA)
Purpose – the scheduling feature in the Panelizer simplifies the management of your panel production process, including design, manufacturing, and installation. The Panelizer's scheduling tool is...
-
Step 4: Floorplan
Purpose – to add, orient (Origin) and outline floors to be panelized. Preparations Add new pdf - when you first select Floorplan, you'll be prompted to create your first floor, where you’ll ...
-
Step 6.4: Elevations > Openings
Openings Purpose – to identify all windows, doors and other openings in the facade that will be used for panelization. You can choose between creating manual openings and "automatically det...
-
Step 5: Stacking
Purpose – to adjust individual floor heights, parapet heights, structural slab thickness (SST), and finished floor thickness (FFT) as needed. Initial global settings are made in Settings > Dimensi...
-
Step 6.5: Elevations > Mouldings
Mouldings Purpose - creates mouldings with assigned structures, depths and prices. Mouldings are displayed in the 3D model and create a panel break but not a material break. Select - allows the u...
-
Step 6.1: Elevations > Cropping
Purpose – this is where the individual elevations or facades are created. These facades are projected onto the floorplan frame to create a 3D model. This is accomplished by using the exterior ele...
-
Step 6.6: Elevations > Materials
Materials Purpose – to assign the desired materials to the building. Material lines indicate a change of material/look type for the facade. Note: Look types & colors will be added later in Finis...
-
Step 6.2: Elevations > Projection
Projection To project the facade onto an elevation, you’ll use a total of 5 left clicks: To begin, click the Projection button, then mouse over a level containing the leftmost part of the e...
-
Step 6.7: Elevations > Architectural Lines
Architectural Lines Purpose – architectural lines create a separation between the panels, a panel break. You can insert them vertically and horizontally wherever you want to create a separation be...
-
Step 8: Finishing
Finishing Purpose - define the finishing for each material that has been assigned in Elevation > Materials. First, select a material by clicking on the 3D model or selecting from the drop-down li...